100% Solid Two Components Anti-Corrosion Polyurethane for Drinking Water Pipe

• Customization: Available
• Color: Green
• Appearance: Liquid
• Model NO.: JHSW8603
• Method: Spray
• Certification: ISO14001, RoHS, ISO9001
• Components: Film Forming Matter
• Formation Mechanism: Conversion Type
• Transport Package: 200L Drum
• Specification: A side 220 kg, B side 200 kg
• Trademark: polysv
• Origin: Qingdao, China
• Production Capacity: 30t/Year

Product Description

JHSW8604  100% solid Two Components Anti-Corrosion Polyurethane for Drinking Water Pipe is the state of the art 100% solids, ultra fast cure, flexible, spray-applied, high build, and two components aromatic polyurethane elastomer. JHSW8604 is non- toxic, Can be used for the inside and outside of metal pipe or other substrate surface protective coating, lining, wear resistant layer and buffer layer.


Advantages: 

1. Fast cure, short down time, no sagging 
2. Excellent Physiochemical Properties 
3. Good adhesion on steels without primer 
4. 100% Solids, No VOC's, Odorless
5. None toxic, can be used in drinking water device, get WRAS approval
6. Good resistance to a wide range of chemical attack
7. Good heat resistant, heavy duty and Durability
8. Seamless, flexible, slick and non-porous

Recommended Uses: 
JHSW8604 100% solid Two Components Anti-Corrosion Polyurethane for Drinking Water Pipe  can be widely used in Oil & Gas Transmission, inside or outside of steel or concrete pipe, Industrial Facilities, and so on.


Properties:
 

Tensile Strength /MPa	≥30	Solids Content/%	100
Elongation/%	≥20	VOC	0
Tear Strength/( N/mm)	≥70	Gel Time/s	50-60
Shore Hardness	≥75 D	Tack Free/ s	80-120
Adhesion /(Pull off, steel,MPa)	≥10	Shelf Life	12 months, unopened at 0~40 ºC
Density/( g/cm^3)	0.95~1.05	Flash Point/ ºC	>100
Abrasion Resistance /(GB/T 1689-1998, cm^3/1.61km, g)	≤0.03	Mix Ratio V/V	1: 1
Impermeability(0.3MPa/30min)	Impervious	Recommended Spreading Thickness/mm	2~3
Chemical Resistance	No corrosion, No Blister, No Spalling	Colors:	Optional