Polyurea Coal Mine Belt Protection and Restoration Solution

• Customization: Available
• Color: Green
• Appearance: Liquid
• Model NO.: JHSW-8603
• Transport Package: 200L Drum
• Specification: A side 220 kg, B side 200 kg
• Trademark: polysv
• Origin: Qingdao, China
• Production Capacity: 30t/Year

Product Description

JHSW-8603 Polyurea Coal Mine Belt Protection and Restoration Solution is the state of the art 100% solids, ultra fast cure, flexible, spray-applied, high build, and two components aromatic polyurea elastomer. JHSW8603 is fast cure and increase the strength in a short time, so that can repair the belt rapidly, which was widely used in the coal mine belt and equipments anti-abrasion and repairing.

Advantages: 

1. Fast cure,  no sagging on vertical surface 
2. Good tesile strengh and elongation at break 
3. Bondable and paintable to various kinds of substrates especially rubbers
4. 100% Solids, No VOC's, Odorless, Environmental friendly
5. Excellent Abrasion and Impact resistance
6. Increase it's strength in a short time
7. Good weather ability, Added color stability
8. Seamless, flexible, slick and non-porous

Recommended Uses: 
JHSW-8603 Polyurea Coal Mine Belt Protection and Restoration Solution can be applied at thicknesses of several ten millimeters, or greater, in a single application. It can be widely used in Mineral Equipment, Mineral Processing, Vibration Screen, Ore Washing Roll, Flotation Cell, Ore Bucket, belt repairing and so on. 

Properties:
 

Tensile Strength /MPa	≥20	Solids Content/%	100
Elongation/%	≥360	VOC	0
Tear Strength/( N/mm)	≥70	Gel Time/s	15-25
Shore Hardness	≥75 A	Tack Free/ s	40-50
Adhesion /(Pull off, concrete,MPa)	≥2.5	Shelf Life	12 months, unopened at 0~40 ºC
Density/( g/cm^3)	0.95~1.05	Flash Point/ ºC	>100
Abrasion Resistance /(GB/T 1689-1998, cm^3/1.61km, g)	≤0.03	Mix Ratio V/V	1: 1
Impermeability(0.3MPa/30min)	Impervious	Recommended Spreading Thickness/mm	2~3
Chemical Resistance	No corrosion, No Blister, No Spalling	Colors:	Optional