High Performence Polyurea Blast Mitigation Coating

• Customization: Available
• CAS No.: /
• Formula: Polyurea
• Model NO.: JHSW8606
• Color: Green
• Appearance: Liquid
• Main Raw Material: Polyurea
• Method: Spray
• Level: Finish Coat
• Drying Method: Drying
• Certification: ISO14001, RoHS, ISO9001
• Substrate: Any Material
• Components: Film Forming Matter
• Formation Mechanism: Conversion Type
• Transport Package: 200L Drum
• Specification: A side 220 kg, B side 200 kg
• Trademark: polysv
• Origin: Qingdao, China
• Production Capacity: 30t/Year

Product Description

JHSW8606 High Performence Polyurea Blast Mitigation Coating used by itself or in combination with other materials to produce protective coatings, anti collision liners, reinforcing layer, and resilient surface on various substrates.


Advantages: 

1. Anti- collision, Impact resistance, Impermeable, Abrasion resistant
2. Bondable and paintable to various kinds of substrates 
3. Fast cure, short down time, no sagging 
4. Excellent Physiochemical Properties 
5. Ambient insensitive, good thermal stability
6. 100% Solids, No VOC's, Odorless, No Toxic Vapors
7. Seamless, flexible, slick and non-porous

Recommended Uses: 
JHSW8606 High Performence Polyurea Blast Mitigation Coating has excellent physical and mechanical properties, good Blast Mitigation, anti-collision, anti-impact performance, can be used in tanks, armored vehicles, safety room, shelters and other equipment with Blast Mitigation, anti-collision requirements.                
treatment.         



Properties:
 

Tensile Strength /MPa	≥30	Solids Content/%	100
Elongation/%	≥300	VOC	0
Tear Strength/( N/mm)	≥110	Gel Time/s	8-10
Shore Hardness	≥55 D	Tack Free/ s	12-15
Adhesion /(Pull off, steel,MPa)	≥10	Shelf Life	12 months, unopened at 0~40 ºC
Density/( g/cm^3)	0.95~1.05	Flash Point/ ºC	>100
Abrasion Resistance /(GB/T 1689-1998, cm^3/1.61km, g)	≤0.04	Mix Ratio V/V	1: 1
Impermeability(0.3MPa/30min)	Impervious	Recommended Spreading Thickness/mm	2~3
Chemical Resistance	No corrosion, No Blister, No Spalling	Colors:	Optional